Product Sections
New Products
Adaptor
1/4in male to 1/8in female.
find out more
Air Helper Kit Toyota 80 and 100 plus 2inch
Air Helper kit Toyota Landcruiser 80 / 100 series + 2 inches
For lifted vehicle that are 2 inches higher than standard.
find out more
Air Helper Kit Toyota Landcruiser 80 and 100
Air Helper kit Toyota Landcruiser 80 / 100 series
find out more
Air Helper Kit 90 and Disco
Air Lift kit for Land Rover 90, Discovery (I and II) and RR Classis.
find out more
Tel 01629 55855
Welcome To Our SiteTelephone 01629 55855 (+44 1629 55 8 55) |
 Land Rover Parts, Viair Compressors and much morePlease take a look at our Facebook page for special offers and information on things we're doing in the workshop. |
NewsletterPlease Click Here to receive our newsletter via email. |
Best Selling Items
Pressure Switch  Pressure switch (1/8in NPT male port fitting) | | Heavy Duty Pressure Switch  Sealed for moisture resistance and comes with 1/8" NPT male port fitting. | | Tank Port Fitting Kit  5pc tank port fitting kit |
| ||||
275C Compressor Kit 2.03cfm  This compressor unit is ideal for hooking up to an air tank. Standard features include, oil-less design, hi performance PTFE piston ring, moisture and dust resistant, gear-less direct drive motor, anodised aluminium alloy cylinder, automatic reset thermal overload protector, mounting plates with vibration isolators, stainless steel braided leader hose, inline check valve, remote mountable intake filter assembly. | | Adaptor 1/4in male to 1/8in female. | | Pressure Switch with Built in Relay  Moisture resistant and tested to last over 10,000 cycles. They measure 4.25”L x 2.25”W and come with 1/8” male port fitting. Leads are pre-fitted with insulated ¼” male push-to-connect terminals that are clearly marked. |
| ||||
Air Tank 2.5 gallon  2.5 gallon air tank comes with six 1/4" ports | | Illuminated Panel Gauge  This is the same gauge used in the on board hook up kit. This gauge is for those who already have an onboard air set up and wish to fit a pressure monitor. This kit comes with built-in on/off switch, mounting bracket, 20ft extension wire with fuse, terminals and grommet strip. This kit is rated for 30 amps | | 325C 24V Compressor Kit (33% Duty, Sealed)  The 325C-24V is a compressor that runs on 24 volts and uses a maximum of 10 amps. Features include a standard ¼” tainless steel braided leader hose with inline check valve and insulated wiring for simple installation. * Must be used with a 150 PSI or lower pressure, non-adjustable pressure switch when used with an air tank. |
| ||||
KC 130watt Spot Lamp Kit  Black KC Daylighter Kit, with 130 watt halogen bulbs and smily face covers. | | KC Lite Locks  Locking nuts for KC lamps | | Air Source Relocation Kit  Relocate air source to more convenient locations with this kit. |
| ||||
Tel 01629 55855
Main Pages
Best Sellers
Pressure Switch
Pressure switch (1/8in NPT male port fitting)
For 12 and 24 volt systems upto 25 amps.
find out more
Heavy Duty Pressure Switch
Sealed for moisture resistance and comes with 1/8" NPT male port fitting.
For 12 and 24 volt systems upto 30 amps.
find out more
Tank Port Fitting Kit
5pc tank port fitting kit
find out more
275C Compressor Kit 2.03cfm
This compressor unit is ideal for hooking up to an air tank. Standard features include, oil-less design, hi performance PTFE piston ring, moisture and dust resistant, gear-less direct drive motor, anodised aluminium alloy cylinder, automatic reset thermal overload protector, mounting plates with vibration isolators, stainless steel braided leader hose, inline check valve, remote mountable intake filter assembly.
find out more
Adaptor
1/4in male to 1/8in female.
find out more
Pressure Switch with Built in Relay
Moisture resistant and tested to last over 10,000 cycles. They measure 4.25”L x 2.25”W and come with 1/8” male port fitting. Leads are pre-fitted with insulated ¼” male push-to-connect terminals that are clearly marked.
* For 12-Volt systems only - up to 40 amps
find out more
Air Tank 2.5 gallon
2.5 gallon air tank comes with six 1/4" ports
6" dia x 25" long x 8" high
find out more
Illuminated Panel Gauge
This is the same gauge used in the on board hook up kit. This gauge is for those who already have an onboard air set up and wish to fit a pressure monitor. This kit comes with built-in on/off switch, mounting bracket, 20ft extension wire with fuse, terminals and grommet strip. This kit is rated for 30 amps
find out more
325C 24V Compressor Kit (33% Duty, Sealed)
The 325C-24V is a compressor that runs on 24 volts and uses a maximum of 10 amps. Features include a standard ¼” tainless steel braided leader hose with inline check valve and insulated wiring for simple installation. * Must be used with a 150 PSI or lower pressure, non-adjustable pressure switch when used with an air tank.
find out more
KC 130watt Spot Lamp Kit
Black KC Daylighter Kit, with 130 watt halogen bulbs and smily face covers.
find out more
KC Lite Locks
Locking nuts for KC lamps
find out more
Air Source Relocation Kit
Relocate air source to more convenient locations with this kit.
These are all the parts you need to place a 1/4inch male or female air fitting from your air tank or compressor to a more convenient place on your vehicle.
find out more